| Fitting Clearance | 0.18–0.25 Mm (standard). Too Small Clearance May Cause Bearing Seizure, While Excessive Clearance Will Lead To Vibration And Oil Leakage. |
|---|---|
| Installation Direction | Place The Side With Oil Grooves Towards The Crankshaft, And Align The Locating Tabs Of Upper And Lower Shells To Avoid Displacement. |
| Common Failures | Alloy Layer Peeling, Bearing Seizure And Excessive Wear. Inspect The Roundness And Surface Roughness Of The Crankshaft Journal During Replacement. |
| Lubrication Requirement | Use Original MWM SAE 40 Special Engine Oil For Gas Engines. Normal Oil Pressure: 4–6 Bar. |
| Packaging Details | Original packaging |
| Type | Wet Cylinder Liner |
|---|---|
| Application | MWM TBG620 V16 (6002) Gas Engine |
| Bore | φ170 Mm |
| Stroke | 195 Mm |
| Material | Alloy Cast Iron With High-frequency Induction Hardened Inner Wall, Wear And Corrosion Resistant |
| Description | Turbocharger Cartridge Group |
|---|---|
| Alternate OEM Part No | 0R-7165 |
| Main OEM Part No | 100-4095 |
| Compatible Models | Cat 3512, 3512B, 3516, 3516B, G3412, G3516 Engines |
| Packaging Details | Original packaging |
| Outer Package Dimension | 480×350×590 Mm |
|---|---|
| Net Weight Of Complete Turbocharger | 20 Kg |
| Gross Weight (with Package) | 28 Kg |
| Compressor Housing | 363 Mm |
| Turbine Housing Height | 406 Mm |
| Arc Length | 228.6 Mm (9") |
|---|---|
| Arc Height | 177.8 Mm (7") |
| Plate Thickness | 2.5 Mm (0.1") |
| Net Weight | 0.14 KG |
| Packaging Details | Original packaging |
| Thread Spec | M16×1.5 |
|---|---|
| Effective Length | 115 Mm |
| Single Bolt Net Weight | 0.23 Kg |
| Packing Box Size (100pcs) | 360×220×100 Mm |
| Gross Weight (100pcs/box) | 24.5 Kg |
| Package Size | 320×220×80 Mm |
|---|---|
| Net Weight | 1.8 KG |
| Gross Weight | 2.1 KG |
| Packaging Details | Original packaging |
| Delivery Time | 15days |
| Structure Material | Bimetallic Steel Backing + Lead-tin Anti-friction Alloy Lining |
|---|---|
| Surface Process | Precision Boring, Custom Oil Grooves For Oil Storage And Lubrication |
| Wear Resistance | Resist High-speed Friction And Engine Oil Corrosion, Stable Under Full-load Continuous Operation |
| Continuous Operating Temperature | -30℃ ~ 180℃ |
| Matching Rated Speed | 1500rpm / 1800rpm Standard Generator Speed |
| Type | Flanged Thrust Bearing (half‑moon / Semicircular) |
|---|---|
| Material | Steel Backing + Lead‑tin Alloy (babbitt) |
| Surface Finish | Phosphate Coated + Oiled (anti‑rust) |
| Standard | MWM OEM Standard, DIN 31657 Compliant |
| Operating Temp | −40 °C To +180 °C |
| Shaft Diameter | ~40 Mm |
|---|---|
| Ring Outer Diameter | ~44 Mm |
| Ring Thickness | ~1.75 Mm |
| Groove Width | ~1.85 Mm |
| Groove Depth | ~2.1 Mm |